Shenzhen Hansome Technology Co., Ltd.
Shenzhen Hansome Technology Co., Ltd.
Add to Cart
KIC X5 Thermal Profiler: 7-Channel K Type Thermocouple for -50˚C to +350˚C Temperature Range
Introduction
With 7, 9, and 12-channel models, the X5 is able to acquire a lot of data, allowing you to precisely evaluate each thermal profile and process in your factory. Measure slope, peak temperature, time above liquidous, and more. Data is transferred to your computer via a USB cable or, for RF models, wirelessly through radio frequency transmitters—no cable connection required.
KIC 'X5' Key Features
1, Robust hardware backed by 2-year warranty
2, Wireless data transfer with RF-equipped models
3, SPC (statistical process control) software included for documentation and production optimization
4, Simplifies oven setup: KIC’s optimization software selects the best oven setup for each new product in seconds
5, User-selectable setup criteria
6, Reduces profiling to a single number: The PWI (process window index) makes it easy for operators, techs, and engineers to see at a glance how close the profile comes to spec.
7, Immediate profile analysis: Objective and personnel-independent profile analysis gives you information you can bank on.
Specifications
| Model | KIC X5 |
| Dimension | 7-channel: 206 x 60 x 17 mm,with shield: 302 x 75 x 23 mm 9-channel: 206 x 75 x 17 mm,with shield: 312 x 90 x 23 mm 12-channel 206 x 98 x 17 mm,with shield: 323 x 113 x 23 mm |
| Accuracy | ± 0.5˚C |
| Resolution | 0.1˚C |
| Interal operating temp | 0˚C~85˚C |
| Sample rate | 0.1 to 10 readings/sec |
| Data points | 224,640 |
| Data transfer | Standard model USB 2.0 (Std-A/Mini-B) after datalogging run RF model Wireless over RF (radio frequency 433.92 MHz), sent real-time during datalogging run, or via USB 2.0 (Std-A/Mini-B) after datalogging run |
| Power | 3 AAA batteries, USB cable when connected to a computer |
| Thermocouple Capacity | Type K, standard (7, 9, or 12, depending on model) |
| Thermocouple Temperature Range | -150˚C to 1050˚C |
| Thermal shield | Cool Touch Stainless Steel 7 or 9 channel |
| Computer Configuration Minimum System Requirements | Dual Core / 1 GHz processor PC w/2 GB RAM 2 GB available storage Video 1024 x 768 resolution, 16-bit 1 available USB port for data download 1 available USB port for software key |
1. High performance software
KICNavigatorTM is the SlimKIC Start of choice. The software automatically analyses tens of millions of temperature and chain speed combinations and provides the user with optimal settings in a very short time (less than a minute).
2. Quick and easy to use
The user simply tells KIC NavigatorTM his process requirements and the software will relay the optimum set point. Its high degree of automation allows even operators who are not familiar with the process to use it. The user no longer needs to try the furnace several times to get a positively optimised setting.
3. More accurate and optimised process settings
Due to time and resource constraints, it is generally not possible to increase or decrease manual settings by more than a small amount (around 5°C), but the KICNavigatorTM is able to make adjustments in the range of 1°C, resulting in more accurately optimised process settings.