Shenzhen Hansome Technology Co., Ltd.
Shenzhen Hansome Technology Co., Ltd.
Add to Cart
High Precision 360° Constant Control System High Speed XYZ Tabletop CCD Screw Fastening
Machine Introduction
This automatic screw locking(fastening) machine is a 5 axis automatic screw locking machine, with blowing feeding or suction type screw feeder, it use single lock electric batch, with dual platform, operator manual load and unload the product from working station.
| Equipment configuration table | |||
| Config | Qty | Config | Qty |
| XYZ three axes | 1/set | Bar code scanning gun | 1/set |
| CCD | 1/set | IPC+Motion Control Card | 1/set |
| Screwdriver | 1/set | Screw feeder | 1/set |
| Main parts list | |||
| Name | Brand | Remarks | |
| Stepper motor | JMC | Same performance brands can be replaced | |
| Linear slide rail | HIWIN | Same performance brands can be replaced | |
| Motion Control Card | SOLID/Mingseal | Same performance brands can be replaced | |
| Screwdriver | BLADY/SENSEWEE | Same performance brands can be replaced | |
| IPC | Advantech/EVOC | Minimum configuration:i3-8G-1TB | |
| Vision camera | HIKVISION | Same performance brands can be replaced | |
| Bar code scanning gun (fixed) | Honeywell(compatible with 1D and 2D code scanning) | Wired | |
Technical Details
| Model | HS-TC5331 |
| X/Y1/Y2//Z Working Range | 500*300*300*100mm |
| Screw feeder | Suction feeding,or blowing based on screws |
| X/Y1/Y2 axis moving speed | Closed loop motor :1-300mm/s |
| Z axis moving speed | Closed loop motor: 1-80mm/s |
| X/Y1/Y2 axis max load | Closed loop motor: 5 KG |
| Z axis max load | Closed loop motor: 5 KG |
| Repeat accuracy | ±0.025mm |
| Operation Method | Auto |
| Programming | PC |
| Control | PLC |
| Weight | 300kg |
| Dimension(L*W*H) | 850*800*1100m |
| Power Supply | Unidirectional 220±10％AC; Frequency 50Hz±2％ |
Features
1. The equipment and its parts are new and unused.
2. The overall noise of the equipment is <70dB (1m from the equipment).
3. Machinery and equipment conform to the relevant standards of China or international standards acceptable to the user.
4. Electrical equipment should comply with IEC standards or international standards acceptable to the user.
5. Supporting equipment and test instruments and meters are measured using IsO international standard units of measurement.
6. Air pressure: 0.4MPa~0.8MPa, air quality is DINISO 8573-1 Grade 3 standard.
7. Temperature: 18℃~30℃, humidity: 30%~70%.
8. Working system: 24 hours operation/day*7 days.
Application
Suitable for mobile phones, hard drives, keyboards, electronic toys, computers, DVD, dots, plastics, electrical appliances, communication equipment, electrical appliances, toys, electronic processing, motors, motors, parts, tablets, notebook computers, digital cameras, remote controls, walkie-talkie, etc.
About Packaging
